Savas BrandaYou can contact us to get an offer.

HANGING TENSION SYSTEMS

HANGING TENSION SYSTEMS
You can reach TentArts suspended tension systems from any location, especially in Gebze.
TentArts suspended tensioning systems are the structural systems that are formed by the use of textile covers and cables that receive only the tensile force completely or partially. The covers used in TentArts suspended stretching systems consist of a special type of fabric obtained by weaving polyester or glass fibers. In order to protect these fibers against external factors and to provide water-air-tightness to the fabric, PVC, PTFE or silicone materials are coated on the fibers. The life of the material can be extended with the appropriate coating material to be used.
The tensile strength and elasticity module of the membrane material are very important in covering an opening.
It can be used multi-purpose tensile systems in outdoor, fair promotion and meeting organizations; You can close the high ceiling workplace, and you can get assembly structures that you can easily set up and dismantle outdoors. You can produce easy and aesthetic solutions to protect from external factors such as sun and rain.
You can use it indoors, as a decorative element in fairs and organizations, as a background in light and stage shows, as permanent suspended ceiling objects in coating the spaces for cocktails, parties and promotional activities.
 
What is a Membrane?

Textile Membrane; Unlike reinforced concrete structures, it is a building material that takes shape (equilibrium form) according to the pre-tension force generated by asymmetric tensile force, not pressure, and serves both as a carrier and a cover. The pre-tension force to be applied is related to the form and design of the structure, and it occurs after static calculations.
It is a special type of fabric obtained by weaving fibers (polyester weaving), which is the main carrier of the membrane cover, which has a wide range of applications from shades to stadiums, amphitheaters, parking lots, marketplaces, show halls, various parks and recreation buildings to airport structures.

Fibers can be coated with various chemicals to protect the membrane cover against external factors and to provide water / air tightness. An additional coating can be applied on these coatings, which have little contribution to the main strength, to give a self-cleaning surface feature and to increase the resistance against ultraviolet and other external factors: Pvdf, TiO2 (titanium dioxide), Fluotop, TX ... There are also perforated (mesh) types that show non-plastic behavior. The primary stage in membrane applications is the projecting stage. At this stage, a design is made in accordance with the functionality, aesthetics and economic expectations of the project owner. In order to ensure the correct load transfer, forms are given to be resistant to wind force, rain flow, snow accumulation and other external factors, taking into account the stretching characteristics of the material. The form determined as a result of the static analysis for the membrane is broken into strips, cutting molds are prepared and combined with an appropriate method.

Usage Areas
 
  • Amphitheater Closures
  • Bar Canopies
  • Wide Span Structures
  • Entrance Canopies
  • Shades
  • Pool Canopies
  • Complex Closures
  • Court Closures
  • Parking lots
  • Market Places
  • Restaurant Canopies
  • Stage Closures
  • Terrace Canopies
  • Tribune Closures
  • Walking Paths
Every stage from the design of the suspension systems to the assembly is carried out in TentArts. TentArts suspended tensioning systems offers its services to the attention of our customers meticulously.
Don't forget to consult us before you start a new project!